Linux version 2.2.5-15 (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 19 22:21:09 EDT 1999 Detected 99717867 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 39.73 BogoMIPS Memory: 46920k/49152k available (996k kernel code, 412k reserved, 764k data, 60k init) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Pentium 75 - 200 stepping 06 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Intel Pentium with F0 0F bug - workaround enabled. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfd8c1 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ttyS02 at 0x03e8 (irq = 4) is a 16550A ttyS03 at 0x02e8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.1 Flags 0x03 (Driver version 1.9) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size PIIX: IDE controller on PCI bus 00 dev 38 PIIX: not 100% native mode: will probe irqs later PIIX: neither IDE port enabled (BIOS) hda: Maxtor 83500D4, ATA DISK drive hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50) hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50) hdc: SAMSUNG CD-ROM SC-148F, ATAPI CDROM drive ide2: ports already in use, skipping probe ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: Maxtor 83500D4, 3339MB w/256kB Cache, CHS=848/128/63 hdc: ATAPI 48X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.54 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed 8regs : 106.299 MB/sec 32regs : 93.345 MB/sec using fastest function: 8regs (106.299 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 60k freed Adding Swap: 100764k swap-space (priority -1) eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 20 af ea bb b9, IRQ 10. 3c509.c:1.16 (2.2) 2/3/98 becker@cesdis.gsfc.nasa.gov. eth0: Setting Rx mode to 1 addresses. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). nfsd_init: initialized fhcache, entries=256 VFS: Disk change detected on device ide1(22,0) ISO 9660 Extensions: Microsoft Joliet Level 1 ISO 9660 Extensions: RRIP_1991A hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 end_request: I/O error, dev 16:00 (hdc), sector 624096 hdc: irq timeout: status=0xd0 { Busy } hdc: ATAPI reset complete ATAPI device hdc: Error: Illegal request -- (Sense key=0x05) Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)