klogd 1.4.1#10, log source = /proc/kmsg started. Inspecting /boot/System.map-2.2.20 Loaded 9818 symbols from /boot/System.map-2.2.20. Symbols match kernel version 2.2.20. Loaded 35 symbols from 3 modules. Linux version 2.2.20 (herbert@gondolin) (gcc version 2.7.2.3) #1 Sat Apr 20 11:45:28 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0009e000 @ 00000000 (usable) BIOS-e820: 0edf0000 @ 00100000 (usable) BIOS-e820: 00100000 @ 0ef00000 (usable) Detected 996584 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1985.74 BogoMIPS Memory: 240572k/245760k available (1756k kernel code, 480k reserved, 2800k data, 152k init) Dentry hash table entries: 32768 (order 6, 256k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page cache hash table entries: 65536 (order 6, 256k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: L1 I Cache: 64K L1 D Cache: 64K CPU: L2 Cache: 64K CPU: AMD mobile AMD Duron(tm) Processor stepping 01 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xfd7ae PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 262144 bhash 65536) Starting kswapd v 1.5 Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: not 100%% native mode: will probe irqs later ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DJSA-220, ATA DISK drive hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=2432/255/63 hdc: ATAPI 24X DVD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 scsi: Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0 Failed initialization of WD-7000 SCSI card! IBM MCA SCSI: Version 3.2 IBM MCA SCSI: No Microchannel-bus present --> Aborting. This machine does not have any IBM MCA-bus or the MCA-Kernel-support is not enabled! megaraid: v1.11 (Aug 23, 2000) aec671x_detect: 3ware Storage Controller device driver for Linux v1.02.00.008. 3w-xxxx: tw_findcards(): No cards found. scsi : 0 hosts. scsi : detected total. Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13) apm: disabled on user request. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 152k freed NET4: Unix domain sockets 1.0 for Linux NET4.0. Adding Swap: 811240k swap-space (priority -1) PCI: Enabling bus mastering for device 00:58 eth0: 8139too Fast Ethernet driver 0.9.18-pre4 Jeff Garzik eth0: Linux-2.2 bug reports to Jens David eth0: RealTek RTL8139 Fast Ethernet board found at 0xcf879000, IRQ 11 eth0: Chip is 'RTL-8139C' - MAC address '00:08:02:05:5d:1e'. eth0: Setting half-duplex based on auto-negotiated partner ability 0000. : restarted Linux PCMCIA Card Services 3.1.33 kernel build: 2.2.20 #1 Sat Apr 20 11:45:28 EST 2002 options: [pci] [cardbus] [apm] PCI routing table version 1.0 at 0xfdf50 Intel ISA/PCI/CardBus PCIC probe: TI 1410 rev 01 PCI-to-CardBus at slot 00:0a, mem 0xffbfe000 host opts [0]: [ring] [pci + serial irq] [pci irq 11] [lat 32/176] [bus 32/34] ISA irqs (scanned) = 3,10 PCI status changes cs: memory probe 0xa0000000-0xa0ffffff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0380-0x04cf: clean. cs: IO port probe 0x04d8-0x04ff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0a00-0x0aff: clean. cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff